To tag your favorites or comment on any of these designs, you must be a registered member of the Autodesk Student Engineering & Design community, and must be logged in.
Join the CommunityIf you're already a member,
login.
(1 - 6 of 6)

|
Alaskan Way Viaduct
My design is a replacement for the Alaskan Way Viaduct in Seattle. The current viaduct is in poor condition and blocks the view of the sun. My tunnel puts traffic underground to get the viaduct out of the way, as well as adding more lanes for heavier traffic in the future.
Joshua Towne (Auburn School District)
Autodesk AutoCAD Civil 3D
|
|

|
White Tank
A reinforced concrete baseplate with detailed reinforcement, water bar and joint metal sheet.
Rene Borchert (Georg-Simon-Ohm Hochschule Nuernberg)
Autodesk AutoCAD Civil 3D
|
|

|
Ivanovo - Complex Road Junction
This is a design for a complex road junction in the city of Ivanovo. Earthwork minimization was required for the project. The upper road is the existing one, so a big cut was created for the lower road and all ground was rationally distributed among all the fills.
Evgeniy Malenkikh (St. Petersburg State University of Architecture & Civil Engineer)
Autodesk AutoCAD Civil 3D
|
|

|
Mulitplex
The design is of a multiplex theatre which consists of 8 closed theatres and a big open air theatre. Each of the closed theatre can accomodate around 500 people.
vivek reddy (Indian Institute of Technology - Madras)
Autodesk AutoCAD Civil 3D
|
|

|
Sunset Bridge
Our first intention was to design a structural arts aspect of a bridge that is only for vehicles. We thought that practicality and safety are significant factors for a bridge. Therefore, our draft idea is extremely simple. We focused more on the structure and safety than on the aesthetic aspect. However, we managed to beautify the bridge without affecting the practicality and structural stability.
Fong Sin Ee (Singapore Polytechnic)
Autodesk AutoCAD Civil 3D
|
|

|
Urban Bridge
The bridge is inspired by the Millau Viaduct in Millau, France and the Jambatan Seri Wawasan in Putrajaya Malaysia.
Lim Zhi Hao (Singapore Polytechnic)
Autodesk AutoCAD Civil 3D
|
|